Thermocold Split

£1,950.00£2,550.00

Thermocold SPLIT UNIT TL6- TL10-TL16
The Thermocold Split units Hot and cold is separated:
the cold part (evaporator) is fitted in the refrigeration compartment, while the hot part is placed in a separate area.

TL6 – for rooms up to 8m3
TL10 – for rooms up to 12m3
TL16 – for rooms up to 17m3 with a drain

Clear
SKU: Thermolux split Categories: ,

Description

Thermocold SPLIT UNIT TL6- TL10-TL16 Wine cellar
The Thermocold Split units Hot and cold is separated:
the cold part (evaporator) is fitted in the refrigeration compartment, while the hot part is placed in a separate area. This could be a technical room, laundry room or storage area.
Fitting of the splits units must be conducted by an approved refrigeration engineer and according to UK refrigeration standards.

TL6 and TL10 split unit are supplied either with a wall or ceiling-mounted configuration.
Wall evaporators have 20% more cooling capacity than ceiling evaporators

Position/fitting
The evaporator must be positioned so there is good air circulation in the room.

The stretch of pipe between the compressor and evaporator must not exceed 10 meters.

The 6 and 10 also have a duct filter on the warm part/compressor and are supplied either with a wall evaporator or a ceiling-mounted configuration.

If the compressor is installed at ambient temperatures below 10°C, you will need to fit a winter control system which can be obtained ready assembled from the factory.

The noise level of the evaporator unit (inside unit) is 30 dB

The noise level of the compressor unit (outside unit) is 40 dB

When purchasing a split refrigeration unit you will also receive an included pipe package.

* All TL Split units must be installed by a qualified refrigeration engineer.

 

Additional information

Thermolux split

TL6 Wall mounted, TL6 Ceilling mounted, TL10 Wall mounted, TL10 Ceilling mounted, TL16 Wall mounted

Reviews

There are no reviews yet.

Be the first to review “Thermocold Split”

Your email address will not be published. Required fields are marked *